CONVERGE Examples

CONVERGE is a commercial computational fluid dynamics (CFD) package that is loaded with physical models for spray, turbulence (including LES), and combustion. CONVERGE is widely used in the internal combustion engine design community due to its ability to generate high-quality orthogonal and body-fitted meshes automatically at runtime, and also due to its adaptive mesh refinement implementation. It's used in automative and aerospace industries.

Rescale's platform ScaleX can be used seamlessly to run CONVERGE simulations in batch mode across multiple cores. The following are some CONVERGE examples on Rescale's platform. Users can import the job setup or look at the results obstained from the run directly.

HSDI Example

Post processing visualization of results (using EnSight)

Post processing visualization of results (using EnSight)


Import Job Setup Get Job Results


Simulation Code Converge Version 2.4
Analysis Type CFD
Description A HSDI 2mm flow bench simulation with CONVERGE. This model has been truncated to have an end time of 3750ms.
Suggested Hardware Onyx / 8 cores
Command
converge
Estimated Run Time 71 minutes
Previous version Import Job Setup v2.3


Turbocharger Compressor

Turbocharger Compressor


Import Job Setup Get Job Results


Simulation Code Converge Version 2.4
Analysis Type CFD
Description A modified CFD simulation of a Turbocharger Compressor with CONVERGE on Rescale. The model was shortened to end after 500 cycles.
Suggested Hardware Onyx / 8 cores
Command
converge
Estimated Run Time 37 minutes


Engine Sector Dual Fuel Example

Enginer Sector Dual Fuel


Import Job Setup Get Job Results


Simulation Code Converge Version 2.4
Analysis Type CFD
Description A CFD simulation of an Engine Sector with CONVERGE. This model was truncated to have a crank angle range of -2 to 2.
Suggested Hardware Onyx / 8 cores
Command
converge
Estimated Run Time 37 minutes
Previous version Import Job Setup v2.3


SI8 Engine Premix SAGE Example

SI8 Engine Premix SAGE


Import Job Setup Get Job Results


Simulation Code Converge Version 2.4
Analysis Type CFD
Description A modified CFD model with CONVERGE. This model has been truncated to have a crank angle range of -6.0 to 6.0
Suggested Hardware Onyx / 8 cores
Command
converge
Estimated Run Time 13 minutes
Previous version Import Job Setup v2.3