Abaqus Examples

Cylinder Head Bolt-up Example

This is a standard benchmark problem on Abaqus - a mildly nonlinear static analysis on an engine block. The model simulates bolting of a cylinder head onto the engine block. Yielding of the gasket accounts for the non-linearity of the simulation.

The model has 5,000,000+ DOF, and the solution is obtained using a direct sparse solver.

Post processing visualization of results

Post processing visualization of results


Import Job Setup Get Job Results


Simulation Code Abaqus 2017
Analysis Type FEA
Description A finite element analysis of bolting a cylinder head on an engine block using Abaqus on Rescale.
Suggested Hardware Onyx / 4 cores
Command
abaqus job=s4b cpus=$RESCALE_CORES_PER_SLOT scratch=$PWD/tmp interactive
Estimated Run Time 28 minutes


Abaqus Car Crash Example

This is an explicit benchmark problem on Abaqus - a car crashing into a rigid wall at 25mph. The complexity, speed and dynamic nature of the impact/contact conditions is a good example of Abaqus/explicit applications. The car is modeled with a von mises material with isotropic hardening.

This model has 200,000+ elements.


Import Job Setup Get Job Results


Simulation Code Abaqus 2017
Analysis Type FEA
Description A finite element analysis of a passenger car crashing into a rigid wall.
Suggested Hardware Onyx / 4 cores
Command
abaqus job=e1 cpus=$RESCALE_CORES_PER_SLOT mp_mode=mpi interactive
Estimated Run Time 71 minutes


Abaqus Tire Footprint Example

This is a standard benchmark problem on Abaqus - a strongly non-linear static analysis of a tire footprint. The model simulates mounting the tire onto the wheel, inflating it, followed by vertical loading. Large displacements, sliding contact and hyperelasticity accounts for the non-linear nature of the model.

This model has 700,000+ DOF.


Import Job Setup Get Job Results


Simulation Code Abaqus 2017
Analysis Type Static Analysis
Description Calculate the footprint of an automobile tire using Abaqus on Rescale.
Suggested Hardware Onyx / 4 cores
Command
abaqus job=s6 cpus=$RESCALE_CORES_PER_SLOT mp_mode=mpi interactive
Estimated Run Time 25 minutes