ANSYS Fluent Batch Examples

In this section, we present several ANSYS Fluent batch examples.

This is a simple model of a t-junction with a hot water and cold water inlet, with mixing and calculation of temperature at the outlet. This example has been configured to output a graph of the residual plot every iteration.

Tjunction Temperature Profile


Import Job Setup Get Job Results


Simulation Code ANSYS Fluent 19.0
Analysis Type CFD
Description A CFD analysis of mixing hot and cold water through a t-junction pipe
Suggested Hardware Onyx / 4 cores
Command
fluent 3ddp -gu -ssh -cnf=$FLUENT_HOSTS -t$RESCALE_CORES_PER_SLOT -i run_plot.jou
Estimated Run Time 4 minutes
Previous versions Import Job Setup v18.0


This is a simple 2-D axisymmetric model of a cylindrical combustor where the flame is considered as a turbulent diffusion flame. A small nozzle in the center of the combustor introduces methane at 80 m/s. Ambient air enters the combustor coaxially at 0.5 m/s.

Combustor


Import Job Setup Get Job Results


Simulation Code ANSYS Fluent 19.0
Analysis Type CFD
Description A 2D axisymmetric CFD analysis of cylindrical methane-air gas combustor
Suggested Hardware Onyx / 4 cores
Command
fluent 2ddp -gu -ssh -cnf=$FLUENT_HOSTS -t$RESCALE_CORES_PER_SLOT -i run_plot.jou
Estimated Run Time 2 minutes